Exclusive forum for HMG, a Free / Open Source xBase WIN32/64 Bits / GUI Development System
http://mail.hmgforum.com/
Is working fine here!!!!!mol wrote:I found a bug in IDE 3 test 8
It doesn't recompile changed forms! Only changing prg files causes recompilation of project!!!
And... if someone can test too, we could confirm that the problem exists and in wich circumstances it arises.Roberto Lopez wrote:Is working fine here!!!!!mol wrote:I found a bug in IDE 3 test 8
It doesn't recompile changed forms! Only changing prg files causes recompilation of project!!!
I've tested with 'multiwin'
Roberto.
It is quite strange. It works for me with the samples at \hmg\ide\samples.esgici wrote:Hi All
The IDE build a temp DIR under working DIR named .hbmk with read-only and hidden properties.
Under some circumstance this DIR can't removed after compilation and remain intact. Because it's hidden, we can't see it under normal conditions. And when we attempt rebuild the project, since this DIR and its content is exist, some modules, especially forms remain non-compiled.
Our Maestro will resolve this problem certainly. Until that, we could continue working by removing this temp DIR.
If you can't see it please use DOS command such as DIR /AD or simply change "hidden files and folders" option in "view" tab of "Folder Options" of "Tools" of Windows Explorer.
Regards
--
Esgici
Ii've verified.Mario Mansilla wrote:Hola Roberto :
Instalo la nueva version (Test 8) y compruebo que no realiza el build cuando modifico alguna propiedad del form .
Te envio un ejemplo simple .
Saludos
Mario Mansilla
Hola Roberto:
Install the new version (Test 8) and see that does not perform the build when I change some property of the form.
I sent a simple example.
Greetings
Mario Mansilla
Maybe you (MOL, Esgici) could help in this.Roberto Lopez wrote: Ii've verified.
I'll work on it.
Regards,
Roberto.
In fact, if you go to \hmg\ide\samples\multiwin and create (if not exist already) multiwin.hbp file containing project prg names and do:Roberto Lopez wrote:Maybe you (MOL, Esgici) could help in this.Roberto Lopez wrote: Ii've verified.
I'll work on it.
Regards,
Roberto.
I've tested many many times, \hmg\ide\samples\multiwin sample in test VIII.
Anytime that I change something in a form, the calling programs are recompiled ok.
When I try the sample posted by Mario Mansilla, the project is not recompiled when form was changed.
What is the difference?
I can't find the reason...
Regards,
Roberto.
I've modified build.bat to create and show the 'build.log' file showing the build details when there is no error.Roberto Lopez wrote: I can't find the reason...
Code: Select all
@echo off
cls
rem ***************************************************************************
rem HMG 3.0 Build batch
rem Roberto Lopez (2009.10.22)
rem ***************************************************************************
rem ***************************************************************************
rem Set variables
rem ***************************************************************************
Set HmgPath=%~dp0
Set Path=%HmgPath%\util;%HmgPath%\mingw\bin;%HmgPath%\harbour\bin;
Set Resources=%HmgPath%\resources\minigui.o
set GT=-gtgui
set DEBUG=""
set BUILDTYPE=""
set REBUILDALL=""
set RUN=.T.
set MT=
rem ***************************************************************************
rem
rem Syntax:
rem
rem Build [/i|/r|/d|/cs|/ci/cr] <PrgFile> | <filelist.hbp> [config.hbc]
rem
rem [/i] : incremental build
rem [/r] : incremental build (rebuild all)
rem
rem [/cs] : Console/mixed mode (std build)
rem [/ci] : Console/mixed mode (incremental build)
rem [/cr] : Console/mixed mode (incremental rebuild all)
rem
rem [/d] : Debug mode (gui and console)
rem
rem
rem <filelist.hbm> : A text file with .hbp extension containing a source list
rem <configfile.hbc>: A text file with configuration parameters as additional
rem libs, include paths and lib paths.
rem
rem <configfile.hbc> Syntax:
rem
rem incpaths = incpath1 incpath2 ... incpathn
rem
rem libpaths = libpath1 libpath2 ... libpathn
rem
rem libs = lib1 lib2 ... libn
rem
rem - library names must not include 'lib' prefix nor '.a' extension.
rem
rem - build.bat will create an 'error.log' file in the app folder when build
rem process ends with an error condition.
rem
rem
rem ***************************************************************************
cls
echo building...
if exist hbmk.log del hbmk.log
if exist windres.log del windres.log
if exist error.log del error.log
if exist _hmg_resconfig.h del _hmg_resconfig.h
rem ---------------------------------------------------------------------------
rem Parameters Processing
rem ---------------------------------------------------------------------------
rem ***************************************************************************
rem NO PARAMETERS OR HELP REQUESTED
rem ***************************************************************************
if "%1"=="" goto syntax
if "%1"=="/?" goto syntax
if "%1"=="-?" goto syntax
if "%1"=="/h" goto syntax
if "%1"=="/H" goto syntax
if "%1"=="-h" goto syntax
if "%1"=="-H" goto syntax
if "%1"=="-help" goto syntax
if "%1"=="-HELP" goto syntax
rem ***************************************************************************
rem No run after build
rem ***************************************************************************
if "%1"=="/n" goto norun
if "%1"=="/N" goto norun
:continue0
rem ***************************************************************************
rem Multi Thread
rem ***************************************************************************
if "%1"=="/mt" goto multithread
if "%1"=="/MT" goto multithread
:continue1
rem ***************************************************************************
rem Console Incremental Rebuild
rem ***************************************************************************
if "%1"=="/cr" goto consoleincrebuild
if "%1"=="/CR" goto consoleincrebuild
rem ***************************************************************************
rem Console Incremental
rem ***************************************************************************
if "%1"=="/ci" goto consoleincremental
if "%1"=="/CI" goto consoleincremental
rem ***************************************************************************
rem GUI Incremental Rebuild
rem ***************************************************************************
if "%1"=="/r" goto increbuild
if "%1"=="/R" goto increbuild
rem ***************************************************************************
rem Console Standard Build
rem ***************************************************************************
if "%1"=="/cs" goto console
if "%1"=="/CS" goto console
rem ***************************************************************************
rem If debug mode specified, use GTWIN and pass -b parameter
rem ***************************************************************************
if "%1"=="/d" goto debug
if "%1"=="/D" goto debug
rem ***************************************************************************
rem If /i parameter rceived set BUILDTYPE to incremental
rem ***************************************************************************
if "%1"=="/i" goto incremental
if "%1"=="/I" goto incremental
rem ***************************************************************************
rem If /i parameter rceived set BUILDTYPE to incremental
rem ***************************************************************************
if "%1"=="/i" goto incremental
if "%1"=="/I" goto incremental
:continue
if exist %~n1.exe del %~n1.exe
if exist %~n1.exe goto error
rem ***************************************************************************
rem If a resource with the same base name as the first parameter exist compile it
rem ***************************************************************************
if exist %~n1.rc echo #define HMGRPATH %HmgPath%\RESOURCES > _hmg_resconfig.h
if exist %~n1.rc copy /b %HmgPath%\resources\minigui.rc+%~n1.rc+%HmgPath%\resources\filler _temp.rc >NUL
if exist %~n1.rc redir -e windres.log windres -i _temp.rc -o _temp.o
if exist %~n1.rc Set Resources=_temp.o
rem ***************************************************************************
rem invoke HBMK2
rem ***************************************************************************
redir -eo hbmk2 -o%~n1.exe %GT% %DEBUG% %MT% %BUILDTYPE% %REBUILDALL% -incpath=%HmgPath%\include -incpath=%CD% -L%HmgPath%\lib -lminigui -lhbmysql -lmysql -lcrypt -ledit -leditex -lgraph -lini -lreport -lhbwin -lhbziparc -lhbmzip -lmsvfw32 -lvfw32 -lsddodbc -lrddsql -lsddmy -lhbodbc -lodbc32 -lhbhpdf -lhbvpdf -lhbmemio -lhbsqlit3 -lsqlite3 -lhbfimage.a -lhbpgsql -lpq -lhbtip -lhbct -lhbmisc -lhbnetio -prgflag=/q %1 %2 %3 %4 %5 %6 %7 %8 %9 %Resources% >hbmk.log
goto end
rem ***************************************************************************
rem Procedure increbuild
rem ***************************************************************************
:increbuild
set BUILDTYPE=-inc
set REBUILDALL=-rebuild
shift
goto continue
rem ***************************************************************************
rem Procedure Console
rem ***************************************************************************
:console
set GT=-gtwin
shift
goto continue
rem ***************************************************************************
rem Procedure Debug
rem ***************************************************************************
:debug
set GT=-gtwin
set DEBUG=-b
echo Options NoRunAtStartup > Init.cld
shift
goto continue
rem ***************************************************************************
rem Procedure Incremental
rem ***************************************************************************
:Incremental
set BUILDTYPE=-inc -head=real
shift
goto continue
rem ***************************************************************************
rem Procedure IncConsole
rem ***************************************************************************
:consoleincremental
set BUILDTYPE=-inc
set GT=-gtwin
shift
goto continue
rem ***************************************************************************
rem Procedure IncConsole
rem ***************************************************************************
:consoleincrebuild
set BUILDTYPE=-inc
set GT=-gtwin
set REBUILDALL=-rebuild
shift
goto continue
rem ***************************************************************************
rem Procedure NoRun
rem ***************************************************************************
:norun
set RUN=.F.
shift
goto continue0
rem ***************************************************************************
rem Procedure Multithread
rem ***************************************************************************
:multithread
set MT=-mt
shift
goto continue1
rem ***************************************************************************
rem Procedure Error
rem ***************************************************************************
:error
echo Can't delete previous %~n1.exe version (still running?) > error.log
goto showlog
rem ***************************************************************************
rem Procedure Syntax
rem ***************************************************************************
:syntax
cls
echo :: Syntax:
echo ::
echo :: "Build [/i|/r|/d|/cs|/ci/cr] <PrgFile> | <filelist.hbp> [config.hbc]"
echo ::
echo :: [/i] : incremental build
echo :: [/r] : incremental build (rebuild all)
echo :: [/cs] : Console/mixed mode (std build)
echo :: [/ci] : Console/mixed mode (incremental build)
echo :: [/cr] : Console/mixed mode (incremental rebuild all)
echo :: [/d] : Debug mode (gui and console)
echo :: filelist.hbm : A text file with .hbp extension containing a source list
echo :: configfile.hbc: A text file with configuration parameters as additional
echo :: libs, include paths and lib paths.
echo ::
echo :: configfile.hbc Syntax:
echo ::
echo :: incpaths = incpath1 incpath2 ... incpathn
echo :: libpaths = libpath1 libpath2 ... libpathn
echo :: libs = lib1 lib2 ... libn
echo ::
echo :: library names must not include 'lib' prefix nor '.a' extension.
echo :: build.bat will create an 'error.log' file in the app folder when build
echo :: process ends with an error condition.
echo ::
pause
goto stop
:end
rem ***************************************************************************
rem Cleanup
rem ***************************************************************************
rem If build error, create 'error.log' ----------------------------------------
if errorlevel 1 if exist windres.log copy /b windres.log+hbmk.log error.log >nul
if errorlevel 1 if not exist windres.log copy /b hbmk.log error.log >nul
rem If no build error, create 'build.log' ----------------------------------------
if errorlevel 0 if exist windres.log copy /b windres.log+hbmk.log build.log >nul
if errorlevel 0 if not exist windres.log copy /b hbmk.log build.log >nul
rem If no error run the exe ---------------------------------------------------
if "%RUN%"==".T." if not errorlevel 1 if exist %~n1.exe %~n1.exe
rem Delete temporary files ----------------------------------------------------
if exist windres.log del windres.log
if exist hbmk.log del hbmk.log
if exist _hmg_resconfig.h del _hmg_resconfig.h
if exist _temp.rc del _temp.rc
if exist _temp.o del _temp.o
:showlog
if exist error.log type error.log
if exist build.log type build.log
:stop